manualshive.com logo in svg

Toshiba R600 S4202 - Portege - Core 2 Duo 1.4 GHz, Maintenance Manual

Share
Download
Toshiba R600 S4202 - Portege - Core 2 Duo 1.4 GHz Maintenance Manual Download Page 15

 

1  Hardware Overview 

PORTEGE R600 Maintenance Manual (960-709) [CONFIDENTIAL]

 1-1 

1.1 Features 

The Toshiba PORTEGE R600 Personal Computer uses extensive Large Scale Integration 
(LSI), and Complementary Metal-Oxide Semiconductor (CMOS) technology extensively to 
provide compact size, minimum weight, low power usage and high reliability. This computer 
incorporates the following features. 

There some models and options. Refer to the Parts List for the configuration of each model 
and options. 

‰

 

Microprocessor 

The Toshiba PORTEGE R600 computer is equipped with an Intel

®

 Core

TM

 2 Duo 

ULV Processor. These processors incorporate a math co-processor, a 3MB L2 cache 
memory. 
The PC comes in with one of the following speeds: 

Intel

®

 Core

TM

 2 Duo ULV Processor (Penryn ULV) 

•

 

•

 

•

 

SU9400 (1.40GHz)  

SU9300 (1.20GHz) 

These processors operate at 800MHz bus clock (FSB). 

‰

 

Memory 

One DDR2-667/DDR2-800 SDRAM slots. Memory modules can be installed to provide a 
maximum of 5GB (on board memory 1GB). Memory modules are available in 512MB, 
1024MB, 2048MB and 4096MB sizes. 

‰

 

Chipset 

The PORTEGE R600 is Equipped with Intel Cantiga GS as North Bridge, Intel ICH9M 
SFF as South Bridge and RICHO R5C847 Card Controller. 

‰

 

VGA Controller 

An internal Graphics Controller in North Bridge is used. 

‰

 

HDD 

The computer has a 2.5-inch SATA HDD. The following capacities are available. 

80/120/160/200

/

250 GB 

Summary of Contents for R600 S4202 - Portege - Core 2 Duo 1.4 GHz



























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands