Toshiba QOSMIO F20 Series Maintenance Manual Download Page 170

Page: 170 / 391

3 Tests and Diagnostics

3.24 Floppy Disk Drive Utilities

3-52

[CONFIDENTIAL]

QOSMIO F20 Maintenance Manual (960-526)

3.24 Floppy Disk Drive Utilities

3.24.1 Function Description

This function formats the FDD, copies the floppy disk and displays the dump list for both the FDD
and HDD.

FORMAT

NOTE

: This program is only for testing a floppy disk drive. It is different from the

Toshiba MS-DOS FORMAT command.

This program can format a floppy disk in the following formats:

(a)

2DD: Double-sided, double-density, double-track, 96/135 TPI, MFM mode, 512
bytes, 9 sectors/track.

(b)

2HD: Double-sided, high-density, double-track, 96/135 TPI, MFM mode, 512
bytes, 18 sectors/track.

COPY

This program copies data from a source floppy disk to a target floppy disk.

DUMP

This program displays the contents of the floppy disk and the designated sectors of the hard
disk on the display.

HDD ID READ

This program reads the hard disk ID and displays hard disk information.

Summary of Contents for QOSMIO F20 Series








































































































































































































































































































































































































Search results

Summary of Contents for QOSMIO F20 Series

Reviews:

Related manuals for QOSMIO F20 Series

Brands by name

Popular brands

Toshiba QOSMIO F20 Series, Maintenance Manual

Search results

Summary of Contents for QOSMIO F20 Series

Reviews:

Related manuals for QOSMIO F20 Series

Brands by name

Popular brands