Toshiba PROSEC T3H User Manual Download Page 57 | Manualshive

Page: 57 / 73

background image

User’s Manual

55

2. Expanded Functions

•

Manual mode
In this mode, the manipulation value MV can be directly controlled by the input value of MMV.
MV differential limit for manual mode DMMV is effective. MH/ML and DMV are not effective.
When mode is changed from manual to auto or cascade, the operation is started from the current MV.

•

Cascade mode
This is a mode for PID cascade connection. PID is executed with CSV as set value.
Different from the auto mode, set value differential limit is not effective. Manipulation value upper/lower
limit MH/ML and differential limit DMV are effective.
Bump-less changing from cascade mode to manual mode is available. (Manual mode manipulation
value MMV is over-written by current MV automatically. MMV

←

MV)

And, bump-less changing from cascade mode to auto mode is available. (Auto mode set value ASV is
over-written by current CSV automatically. ASV

←

CSV)

•

MV tracking
This function is available in auto and cascade modes. When the tracking designation (

A+10

bit 2) is ON,

tracking input TMV is directly output as MV.
Manipulation value upper/lower limit MH/ML is effective, but differential limit DMV is not effective.
When the tracking designation is changed to OFF, the operation is started from the current MV.

Note

•

FPID3 instruction is only usable on the main-program.

•

FPID3 instruction must be used under the constant scan mode. The constant scan interval can be
selected in the range of 10 to 200 ms, 10 ms increments.

•

The data handled by the FPID3 instruction are % units. Therefore, process input value PVC, manipulation
value MV, etc., should be converted to % units (scaling), before and/or after the FPID3 instruction.

«
...
55
56
57
58
59
...
»

Summary of Contents for PROSEC T3H










































































Reviews:

No comments

Related manuals for PROSEC T3H

Brand: J4C Pages: 4

Brand: ABB Pages: 6

Brand: Rayrun Pages: 2

Brand: IDenticard Pages: 2

Brand: 3Ware Pages: 2

Brand: Barthelme Pages: 8

Brand: CAB Pages: 28

Brand: C-TEC Pages: 16

Brand: C&T Solution Pages: 27

SECURIT ST800L+

Brand: C&K systems Pages: 16

Brand: Danfoss Pages: 2

Brand: Danfoss Pages: 2

Brand: Danfoss Pages: 12

Brand: Danfoss Pages: 24

Brand: Danfoss Pages: 60

Brand: Danfoss Pages: 10

Brand: Danfoss Pages: 20

Brand: E+E Elektronik Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands