Toshiba PROSEC T3H User Manual Download Page 3 | Manualshive

Page: 3 / 73

background image

User’s Manual

1

Safety Precautions

This manual is prepared for users of Toshiba’s Programmable Controller T3H.
Read this manual thoroughly before using the T3H. Also, keep this manual and related manuals
so that you can read them anytime while the T3H is in operation.

General Information

1. The T3H has been designed and manufactured for use in an industrial environment.

However, the T3H is not intended to be used for systems which may endanger human
life. Consult Toshiba if you intend to use the T3H for a special application, such as
transportation machines, medical apparatus, aviation and space systems, nuclear
controls, submarine systems, etc.

2. The T3H has been manufactured under strict quality control. However, to keep safety

of overall automated system, fail-safe systems should be considered outside the T3H.

3. In installation, wiring, operation and maintenance of the T3H, it is assumed that the

users have general knowledge of industrial electric control systems.
If this product is handled or operated improperly, electrical shock, fire or damage to this
product could result.

4. This manual has been written for users who are familiar with Programmable Controllers

and industrial control equipment. Contact Toshiba if you have any questions about this
manual.

5. Sample programs and circuits described in this manual are provided for explaining the

operations and applications of the T3H. You should test completely if you use them as
a part of your application system.

Hazard Classifications

In this manual, the following two hazard classifications are used to explain the safety
precautions.

Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury. It may also be used to alert

against unsafe practices.

Even a precaution is classified as CAUTION, it may cause serious results depending on
the situation. Observe all the safety precautions described on this manual.

!

WARNING

!

CAUTION

«
1
2
3
4
5
...
»

Summary of Contents for PROSEC T3H










































































Reviews:

No comments

Related manuals for PROSEC T3H

Brand: Radio Shack Pages: 52

Brand: Walchem Pages: 10

Brand: ZIMO Pages: 38

Brand: Saga Pages: 9

Brand: LAE electronic Pages: 7

Brand: LAE electronic Pages: 2

Brand: Lawler Pages: 4

Brand: QTP Pages: 2

Brand: National Instruments Pages: 6

Brand: National Instruments Pages: 6

Brand: T&D Pages: 2

Brand: T&S Pages: 5

Brand: Keba Pages: 16

Brand: KEB Pages: 16

Brand: IBC Pages: 8

GECO LUX GECO60

Brand: GiBiDi Pages: 48

Brand: Viking Pages: 4

GA Figure 220-D

Brand: Vag Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands