Toshiba PQG20U-10K00E User Manual Download Page 270

Page: 270 / 367

270

Using the RAID-0 or RAID-1 Utility

TOSHIBA RAID Console Utility

5.375 x 8.375 ver 2.3

Sample Array information window

❖

Array No.

Identification number of array.

❖

Status

—Indicates the status of the array. The contents

which will be displayed are as follows:

❖

Optimal

—The physical drives in the array are

connected with the computer, are online, are in
optimal status, and are not in the process of
rebuilding data.

❖

Degraded

—One of the physical drives in the array is

not connected with the computer, is not in optimal
status, or is in the process of rebuilding data.

❖

Critical

—One of the physical drives has been

disabled from use as part of the array.

❖

RAID level

—Displays the RAID level for the array.

❖

tripe size

—Displays the size of the segment written

onto each hard disk in the RAID-0 array.

❖

Created date

—Shows the date and time the array was

created.

❖

Capacity

—Displays the maximum size of the array.

Summary of Contents for PQG20U-10K00E
















































































































































































































































































































































































Search results

Summary of Contents for PQG20U-10K00E

Reviews:

Related manuals for PQG20U-10K00E

Brands by name

Popular brands

Toshiba PQG20U-10K00E, User Manual

Search results

Summary of Contents for PQG20U-10K00E

Reviews:

Related manuals for PQG20U-10K00E

Brands by name

Popular brands