User’s Manual
4-15
Operating Basics
How to make a DVD-Video
Simplified steps for making a DVD-Video from video data captured from a
DV-Camcorder:
1. Click [Start]-[All Programs] - [InterVideo WinDVD Creator2]-[InterVideo
WinDVD Creator] to launch WinDVD Creator.
2. Click [Capture] button then capture the video data from the DV-
Camcorder via IEEE1394.
3. Click [Edit] button then drag the video clips from [Video Library] tab to
the edit track.
4. Click [Make Movie] button in the top bar.
5. Double Click the Right arrow button icon in the center of right side.
6. Put a blank DVD-R/+R disc or an erased DVD-RW/+RW disc in the
drive.
7. Click [Start] to record to the disc.
8. When recording is finished, the tray opens.
How to learn more about InterVideo WinDVD Creator
Please refer to the on-line Help for additional InterVideo WinDVD Creator
information.
Important information for use
Note the following limitations when you write video DVD:
1. Editing digital video
■
Log in with Administrator rights to use WinDVD Creator.
■
Make sure that your computer is running on AC power when using
WinDVD Creator.
■
Operate the computer at Full Power. Do not use power-saving
features.
■
While you are editing DVD, you can display previews. However, if
another application is running, the preview might not display
properly.
■
WinDVD Creator cannot show video on the external monitor when in
simultaneous mode.
■
WinDVD Creator cannot edit or play copy protected content.
■
Do not change display settings while using WinDVD Creator.
■
Do not enter standby/hibernation mode while using WinDVD
Creator.
■
Do not operate WinDVD Creator immediately after turning on the
computer. Please wait until all Disc Drive activity has stopped.
■
When recording to a DV-Camcorder, to ensure you capture all of
your data, let the camcorder record for a few seconds before you
begin recording your actual data.
■
CD recorder, JPEG functions, DVD-Audio, mini DVD and Video CD
functions are not supported in this version.
