Toshiba PQF10C-GP102E User Manual Download

Page: 110 / 214

User’s Manual

6-12

Power

Installing the battery pack

To install a battery, follow the steps below.

1. Turn the computer’s power off.

2. Disconnect all cables connected to the computer.

3. Attach the battery pack in a battery cover.

Attach the battery pack in a battery cover

4. Insert the battery pack with a battery cover.

Securing the battery pack

For environmental reasons, do not throw away a spent battery pack.
Please return spent battery packs to your TOSHIBA dealer.

■

The battery pack is a lithium ion battery, which can explode if not
properly replaced, used, handled or disposed of. Dispose of the battery
as required by local ordinances or regulations. Use only batteries
recommended by TOSHIBA as replacements.

■

Do not touch the latch while holding the computer. Or you may get
injured by the dropped battery by unintentional release of the latch.

Battery pack

Battery cover

Battery pack

Summary of Contents for PQF10C-GP102E























































































































































































































Search results

Summary of Contents for PQF10C-GP102E

Reviews:

Related manuals for PQF10C-GP102E

Brands by name

Popular brands

Toshiba PQF10C-GP102E, User Manual

Search results

Summary of Contents for PQF10C-GP102E

Reviews:

Related manuals for PQF10C-GP102E

Brands by name

Popular brands