Toshiba Portege 4005 User Manual Download Page 50

Page: 50 / 53

If Something Goes Wrong

PC Card problems

5.375 x 8.375 ver 2.3.2

❖

Reboot

For detailed information, refer to your operating system’s
documentation.

The Windows

XP operating system can help you

If the operating system has started properly, but you still have
a problem using your computer, the Windows

Help and

Support Center can assist you in troubleshooting the problem.

To access Windows

XP Help and Support:

Click

Start

, then click

Help and Support

The Help and Support Center window appears.

Then do one or both of the following:

❖

In the search field, type in the topic of the problem with
which you need help and follow the on-screen
instructions.

❖

Click a problem you would like help with from the
listings and follow the on-screen instructions.

You can connect to Support Online by clicking

Support

from

the menu.

PC Card problems

PC Cards (PCMCIA-compatible) include many types of
devices, such as a removable hard disk, additional memory,
or a pager.

Most PC Card problems occur during installation and setup
of new cards. Verify with the PC Card documentation that the
card is compatible with the Windows

XP operating system.

Summary of Contents for Portege 4005






















































Search results

Summary of Contents for Portege 4005

Reviews:

Related manuals for Portege 4005

Brands by name

Popular brands

Toshiba Portege 4005, User Manual

Search results

Summary of Contents for Portege 4005

Reviews:

Related manuals for Portege 4005

Brands by name

Popular brands