Understanding OIS Features
Page 17
4.1.7. Touch-Screen Task List:
OIS60 has a Touch-Screen for performing various tasks. Touch-Screen Tasks are same as the Screen
tasks. Tasks can be performed in three different instances: Touch key Press, Touch Key Pressed and
Touch Key Released Tasks. Please refer to Screen Task List details. Same touch key can have three
tasks to be performed for three instances.
Other than the Screen Task-list, Touch-Screen Task List has two additional Tasks supported:
1. Key’s Specific Task.
This task enables user to define task which are specific for keys. This task is specially useful for
editing data in the system or checking / acknowledging alarms. Following is the list of key’s specific
tasks:
1.
Clear Data Entry: Clears Data after data entry is initiated.
2.
Cancel Data Entry: Cancels the data entered and restores previous data.
3.
Accept Data Entry: Initiates data entry and accepts data entered.
4.
Switch to next Data Entry: Next data entry is selected.
5.
Increase Value by 1: Value of a tag is increased by 1.
6.
Decrease Value by 1: Value of a tag is decreased by 1.
7.
Increase Digit by 1: Value of a single digit of a tag is increased by 1.
8.
Decrease Digit by 1: Value of a single digit of a tag is decreased by 1.
9.
Shift Value to Left: Value is shifted to left.
10.
Move Cursor to Left: Cursor is moved to left to edit next digit.
11.
Move Cursor to Right: Cursor is moved to right to edit next digit.
12.
Sign Key (+/-): Used for signed data entry.
13.
Sign Key (+/-) and 0: Single key used as a sign key as well as numeric key 0. If this key
is pressed immediately after data entry is initiated, key is taken as sign key else it is
taken as ‘0’ key.
14.
Numeric Key 0 - 9: Enters the numeric after data entry is initiated.
15.
Edit Bit On: A coil is turned on after data entry is initiated.
16.
Edit Bit Off: A coil is turned off after data entry is initiated.
17.
Acknowledge Alarm: Active alarm is acknowledged using this key.
18.
Next Alarm: Next alarm from the container is displayed.
19.
Previous Alarm: Previous alarm from the container is displayed.
2. Set RTC:
User can edit RTC registers of the OIS unit. This task increments selected RTC register at a time
for one instance. User can edit Year / Month / Date / Hour / Minutes / Seconds / Day of the week.
User must place a Time / Date object on the screen for editing the RTC.
Screen Objects:
For the OIS60, screen objects are text as well as graphic objects. Types of Objects supported are:
General Objects:
1. Plain Text
2. Coil Data Entry
3. Register Data Entry
4. Display Coil Status
5. Display Register Data
6. Display Register Text
7. Time
8. Date
9. Alarms
10. Rectangle
11. Ellipse
12. Rounded Rectangle
13. Line
Wizards:
14. Bit Button
15. Word Button
16. Bit Lamp
17. Word Lamp
18. Single Bar Graph
19. Multiple Bar Graph
20. Analog Meter
21. Numeric Keypad
22. Bitmaps
