Toshiba NB 100 Series, Maintenance Manual

Page: 74 / 211

3 Diagnostic Programs 3.2 Quick Start
14
TOSHIBA NB100 Maintenance Manual
‹
Current Time(C. TIME) : Current system time, e.g. ‘C.TIME:2008-0
2
-16
00
:42:40’ in
the above screen;
‹
Test Time Remaining (LEFT) : In TIMEBOUND mode, it would display the remaining
test time at the same location as Current TIME (C. TIME) in the above screen;
‹
Current Loop Count : In LOOPBOUND mode, it will display the total LOOP number
planning to execute and the current LOOP number have been finished, e.g. ‘COUNT:
01/01’ in the above screen;
‹
CPU Temperature : Detect the temperature in the current CPU, e.g. ‘CPU:
56
C’ in the
above screen;
‹
Remaining Battery Capacity : Remaining Battery Capacity detected in the current
Battery, e.g. ‘BAT:
46
%’;
‹
Test Order : Define the test sequence. There is two sequence modes: Sequential Test
Mode and Random Test Mode. The default mode is Sequential Test Mode, it would
displays ‘ORDER: SEQ’ as in the above screen;
‹
LOG File Name : Display the file name of the test log, e.g.
Custom
.Log in the above
screen;
‹
Start Test Time (S.TIME): Display the test start time for the current test item or the test
script, e.g. ‘S.TIME: 2008-0
2
-16
00
:42:28’ in the above screen;
‹
Break On Error : Display ‘HALT’ as shown in the above screen when ‘Break On Error’
is enabled;
‹
Wait On Error : Display ‘WAIT’ as shown in the above screen when ‘Wait On Error’ is
enabled;
‹
Pause Enable : Display ‘PAUSE’ when “Pause Enable” is enabled;
‹
Manual Interrupt Method : Display ‘Esc: Break’ to tell the user how to manually
interrupt the test process.