manualshive.com logo in svg

Toshiba NB 100 Series, Maintenance Manual

Share
Download
Toshiba NB 100 Series Maintenance Manual Download Page 45

2  Troubleshooting 

2.4  System Board 

2-10 

TOSHIBA NB100  Maintenance Manual 

Procedure 2  Test Program Check 

The maintenance test program contains several programs for diagnosing the system board 
and CPU.  Execute the following test programs using the procedures described in Chapter 3. 

1.

 

System test 

2.

 

Memory test 

3.

 

Keyboard test 

4.

 

Display test 

5.

 

Hard Disk test 

6.

 

Mouse test 

7.

 

Sound test 

8.

 

LAN test 

 
If an error is detected during these tests, go to Procedure 3. 
 

Procedure 3

 

Replacement Check 

The system board, memory, may be defective.  Disassemble the computer following the steps 
described in Chapter 4 and replace the system board, memory module with a new one. 

Summary of Contents for NB 100 Series




















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands