Toshiba NB 100 Series, Maintenance Manual

Page: 73 / 211

3.2 Quick Start 3 Diagnostic Programs
and description would be shown here. Detailed error report could be viewed with
Logview.exe.
‹
When pressing ESC key during the test process, a User Break Windows will be popped
up for the user to select.
3. USER BREAK
Pressing ESC key to interrupt the test, USER BREAK message box would be prompted out
in the central of Diagnostics Window for the user to select the following actions:
‹
CONTINUE ---- Continue the test;
‹
SKIP ---- Stop the sub-item of current test item to go to the next item’s test;
‹
ABORT ----Stop the current test item to test the next module.
‹
ABORT ALL ---- Stop all the selected test items. User could use the hot key Ctrl+D to
achieve the same operation. When the user calls ABORT ALL, the following message
box will prompt for his selecting.
4. Title Bar:
Title Bar located at the top of the window, it includes information as follows:
‹
Program Name and Its Version: Service Diagnostic Ver1.10;
‹
Test Module Name: Label the name and version of the test module. For example, in the
above screen, the name of the test module is ‘Memory Tester Build Date 200
7
.
02.09
’.
‹
Status Bar: Located at the bottom of the screen as follows:
The status bar is used to indicate the current script setting and test status. It consists of two
lines that includes the information as follows:
‹
Test Mode : TIMEBOUND or LOOPBOUND, e.g. LOOPBOUND in the above screen;
‹
Script File Name : Script file name, e.g. ‘
Custom
.INI’ in the above screen;
TOSHIBA NB100 Maintenance Manual
13