DISASSEMBLY INSTRUCTIONS
B3-2
3-5: CLAMPER ASS'Y (Refer to Fig. 3-5-A)
Press the Clamper and rotate the Clamper Plate
clockwise, then unlock the 3 supports (1).
Remove the Clamper Plate, Clamper Magnet and
Clamper.
1.
2.
Clamper Plate
Clamper Magnet
Fig. 3-5-A
Main Frame
Clamper
(1)
(1)
(1)
NOTE
1. In case of the Clamper Ass'y installation, install
correctly as Fig. 3-5-B.
Rack Loading
(1)
Main Frame Ass'y
Main Gear
3-4: RACK LOADING/MAIN GEAR/PULLEY GEAR
(Refer to Fig. 3-4-A)
1.
2.
3.
Press down the catcher (1) and slide the Rack Loading.
Unlock the support (2) and remove the Pulley Gear.
Remove the Main Gear.
Pulley Gear
(2)
Fig. 3-4-A
Fig. 3-4-B
NOTE
1. In case of the Rack Loading installation, do not mesh it
to the Main Gear as shown the Fig. 3-4-B.
Check Hook
Main Gear
Rack Loading
Loading Belt
Pulley Gear
(1)
Main Frame Ass'y
3-3: LOADING MOTOR PCB ASS'Y/ LOADING BELT
(Refer to Fig. 3-3-A)
1.
2.
3.
4.
5.
Remove the Loading Belt.
Remove the screw (1).
Remove the 2 screws (2).
Remove the Loading Motor PCB Ass'y.
Remove the Pulley Gear.
Fig. 3-3-A
(2)
(2)
Loading Motor PCB Ass'y
• Screw Torque: 2.5
±
0.3kgf•cm (Screw (1))
• Screw Torque: 1.0
±
0.3kgf•cm (Screw (2))
NOTE
1.
2.
3.
In case of the Pulley Motor installation, check if the
value of the Fig. 3-3-B is correct.
When installing the Loading Motor PCB Ass'y, install it
correctly as Fig. 3-3-C.
In case of the Loading Motor PCB Ass'y installation,
hook the wire on the Main Frame Ass'y as shown Fig.
3-3-C.
Fig. 3-3-B
7.0
±
0.1mm
Safety surface for pressing
of the insert.
Loading Motor
Pulley Motor
Fig. 3-3-C
Rack Loading
A
B
The Lever should be position
between A and B.
Check Hook
Loading Motor PCB Ass'y
