– 47 –
Monitoring function of remote control switch
When using the remote control (Model Name: RBC-AMT32UL), the following monitoring
function can be utilized.
Calling of display
<Contents>
The temperature of each sensor of the remote control, indoor unit and outdoor unit and the operating
status can be checked by calling the service monitor mode from the remote control.
<Procedure>
1
Push + buttons simultaneously for 4 seconds or more to call up the service monitor
mode.
The service monitor goes on and firstly the temperature of the CODE No.
00
00
00
00
00
is displayed.
Ø
2
Push
button to change CODE No.
(CODE No.) to the CODE No. to be monitored.
For display code, refer to the following table.
Ø
3
Push
UNIT LOUVER
button (button of left side) to change to item to be monitored.
The sensor temperature of indoor unit or outdoor unit in its refrigerant line and the
operating status are monitored.
Ø
4
Push button to return the status to the normal display.
1 2 3 4
Returns to normal display
<Operation procedure>
2
4
1
3
SET
TIME
TIMER SET
TEST
FILTER
RESET
CL
FAN
SAVE
SWING/FIX
VENT
MODE
ON / OFF
UNIT LOUVER
TEMP.
