Toshiba IPS8-1T - IP/Network NVR, 1TB HD User Manual Download Page 47

Page: 47 / 117

29101AD

Verify the information.

Click Next if the information provided is correct.

Once validated, the user will be provided with the Unlock Code.

Print the page and save for later reference.

Unlocking the Upgrade

Return to Setup > Network Cameras > License.

Enter the Unlock Code generated by the Surveillix Registration Site into the License Key box.

Click Register and confirm that the new License Key is listed in the Channel Connection License box.

Click OK.

Unlocking New Network Device

Follow the instructions above for registering the NVR upgrade to unlock any additional network devices.

Summary of Contents for IPS8-1T - IP/Network NVR, 1TB HD






















































































































Search results

Summary of Contents for IPS8-1T - IP/Network NVR, 1TB HD

Reviews:

Related manuals for IPS8-1T - IP/Network NVR, 1TB HD

Brands by name

Popular brands

Toshiba IPS8-1T - IP/Network NVR, 1TB HD, User Manual

Search results

Summary of Contents for IPS8-1T - IP/Network NVR, 1TB HD

Reviews:

Related manuals for IPS8-1T - IP/Network NVR, 1TB HD

Brands by name

Popular brands