52
Installation
Appendix
Introduction
How to Use
Configuration
Definitions
Motion detection
This section explains how to configure the Network Camera to enable motion
detection. A total of three motion detection windows can be configured.
IK-WB70A(TCP-AV)
To enable motion detection, follow the steps below:
1. Click New to add a new motion detection window.
2. In the Window Name text box, enter a descriptive name for the motion detection
window.
■ To move and resize the window, drag-drop the window.
■ To delete window, click X at top right of the window.
3. Define the sensitivity to moving objects and the space ratio of all alerted pixels
by moving the Sensitivity and Percentage slider bar.
4. Click Save to take effect.
5. Select Enable motion detection to enable this function.
For example:
IK-WB70A(TCP-AV)
The Percentage Indicator will rise or fall depending on the image variation. When
motions are detected by the Network Camera and are judged to exceed the defined
threshold, a red bar rises. Meanwhile, the motion detection window will be outlined
in red. Photos or videos can be captured instantly and configured to send to the
remote server (Email, FTP) by using this feature as a trigger source. For more
information on how to plot an event, refer to Application on page 57.
Configuration Definitions (Cont.)
㪎㪎㩷㪆㩷㪈㪍㪇
