61
Installation
Appendix
Introduction
How to Use
Configuration
Definitions
HTTP:
Select to send the media to an HTTP server when a trigger is activated.
■ URL: Enter the URL of the HTTP server.
■ User name: Enter the user name.
■ Password: Enter the password.
To verify if the HTTP settings are correctly configured, click Test. The result will be
shown in a pop-up window. If it works, you will also receive a test.txt file on the HTTP
server.
Network storage:
Select to send the media to a network storage when a trigger is
activated.
■ Network storage location: Enter the path of the network storage.
■ Workgroup: Enter the workgroup for network storage.
■ User name: Enter the user name.
■ Password: Enter the password.
To verify if the network storage settings are correctly configured, click Test. The
result will be shown in a pop-up window. If it works, you will also receive a test.txt file
on the network storage server.
When completed, click Save to take effect and then click Close to quit this page.
The new server name will appear in the server drop-down list on the application
page as below. To remove a server setting from the list, select a server name from
the drop-down list and then click Delete. Only when the server setting is not being
applied to an event setting can it be deleted.
㪏㪍㩷㪆㩷㪈㪍㪇
