51
Installation
Appendix
Introduction
How to Use
Configuration
Definitions
Audio settings
Mute:
Select this option to disable audio transmission from the Network Camera
to all clients. Note that if mute mode is turned on, no audio data will be transmitted
to all clients even though the audio transmission is enabled in the Client Settings
page. In that case, the following message is displayed.
Input gain:
The input gain are selectable at the folowing settings:
-34.5 dB, -33 dB, -31.5 dB, -30 dB, -28.5 dB, -27 dB, -25.5 dB, -24 dB, -22.5 dB,
-21 dB, -19.5 dB, -18 dB, -16.5 dB, -15 dB, -13.5 dB, -12 dB, -10.5 dB, -9 dB, -7.5
dB, -6 dB, -4.5 dB, -3 dB, -1.5 dB, 0 dB, +1.5 dB, +3 dB, +4.5 dB, +6 dB, +7.5 dB,
+9 dB, +10.5 dB, +12 dB.
Audio type :
Select audio codec AAC or GSM-AMR and the bit rate
AAC targets at performing good sound quality at the cost of higher bandwidth
•
consumption. The bit rates are selectable at the following rates: 16Kbps, 32Kbps,
48Kbps, 64Kbps, 96Kbps and128Kbps
GSM-ARM is designed to optimize speech quality and requires less bandwidth.
•
The bit rates are selectable at the following rates: 4.75Kbps, 5.15Kbps,
5.90Kbps, 6.7Kbps, 7.4Kbps, 7.95Kbps, 10.2Kbps and 12.2Kbps.
When completed with the settings on this page, click Save to take effect.
㪎㪍㩷㪆㩷㪈㪍㪇
