Toshiba IDM5060, Installation Instructions Manual

Page: 15 / 58

SUPPORTED IP TELEPHONES IP5000-Series Physical Specifications
IPT Installation Manual Feb,, 2015 1-3
IP5000-Series Physical
Specifications
IP5000-Series Telephone
Tilt Angles
The IP5000-series telephones have three tilt positions built into the base.
There is also a tilt stand extension that adds an additional 20 degrees of
tilt. When the telephone is sitting on a desk or table there are a total of six
different angles of tilt available. When wall mounted there are two angles
available. Refer to the figures below and the installation section for more
detail.
Table 1-1 IP5000-Series Telephones and ADMs Physical Dimensions
Device Width
Depth
Without Tilt
IP5000 series telephones 10.16 in. (258 mm)
6.10 in. (155 mm) IDM5060 10.16 in. (258 mm)
KM5020, LM5110 3.54 in. (90 mm)
Width
Depth
1 in. (25 mm)
Table 1-2 IP5000-Series Tilt Angels
Table / Wall Mount Tilt Without Stand Tilt with Stand Figure
Table 15°, 27.5°, 40° 35°, 47.5°, 60° Refer to Figure 1-1
Wall Mount 0°, -20° N/A Refer to Figure 1-2