19
y
Import:
Copy the Menu setup stored in USB memory stick into DVR. Please plug in the memory stick and then click (
)
Import.
y
Export:
Store the Menu setup of DVR in USB memory stick. Please plug in the memory stick and then click (
) Export.
y
When user is on Default, Import or Export process, a message box will ask the progress and click the confirmation icon,
then a message box will show whether its success or failure.
System Log
y
Export:
Store the System Log contents in USB memory stick. Please plug in the memory stick and then click (
) Export.
y
When user is on Default, Import or Export process, a message box will ask the progress and click the confirmation icon,
then a message box will show its success or failure.
y
When user complete Status data input, please click (
) Version and the following screen will appear.
Version Upgrade
y
User may upgrade DVR software.
y
Please follow the Upgrade procedure below.
①
Plug USB memory stick having upgrade file into DVR.
②
Click (
) Load frame. Then, software version stored in the USB will appear on the left-hand side.
③
Click (
) Start frame to start the upgrade.
④
When the upgrade is completed, a dialogue box pops up. Please choose ‘OK’ and DVR will auto-reboot.
y
When user completes Version input, please click (
) Record. Then, the following screen will appear.
CAUTION
PLUGGING OUT USB DEVICE OR FORCED POWER-OFF MAY CAUSE PERMANENT DAMAGE.
CAUTION
DO NOT UPGRADE UNTIL INSTALL A HARD DISK DRIVE. MAKE SURE TO UPGRADE WHEN HDD IS IN PROPER OPERATION.
Version
(NOTE)
This has a different function from Factory Reset Switch on the back panel of DVR in that System Log is not initialized.
Record
