GX9 ASD Quick Start Guide
53
Default Setting Changes
To change a default parameter setting, go to the root of the
Program
menu and turn the
Rotary Encoder
until the desired parameter group is within the cursor block and press the
Rotary Encoder
(repeat if there
is a submenu).
Press the
Rotary Encoder
to select the default setting to be changed and the selection takes on the reverse
video format (dark background, light text). Turn the
Rotary Encoder
to change the value of the
parameter. Press the
ESC
key before accepting the change to exit the menu without saving the change or
press the
Rotary Encoder
to accept the new setting.
For a complete listing of the
Program
mode menu options, see the section titled
. Menu items are listed and mapped for convenience. The
Direct Access Numbers
are listed where applicable.
The default settings may also be changed by entering the
Parameter Number
of the setting to be changed
at the
Direct Access
menu (Program
Direct Access
applicable parameter number
). A listing of the
Direct Access/Parameter Numbers
and a description of the associated parameter may be found in the
section titled Direct Access Parameter Information in the
GX9 ASD Installation & Operation Manual
.
A listing of all parameters that have been changed from the default setting may be viewed sequentially by
accessing the
Changed From Default
screen (Program
Utilities
Changed From Default).
Note:
Parameter
F201
was changed to create the example shown in
The
Changed From Default
feature allows the user to view (or change) the parameters that are different
from the default or the post-reset settings. Once the
Changed From Default
screen is displayed, the
system automatically scrolls through all of the system parameters and halts once reaching a changed
parameter.
The
Rotary Encoder
may be clicked once clockwise to continue scrolling forward or clicked once
counterclockwise to begin scrolling in reverse. With each click of the
Rotary Encoder
from a stop, the
system scrolls through the parameters and stops at the next parameter that has been changed.
Pressing the
Rotary Encoder
while a changed parameter is displayed accesses the settings of the changed
parameter for viewing or changing.
Pressing
ESC
while the system is performing a
Changed From Default
search terminates the search.
Pressing
ESC
when done searching (or halted at a changed parameter) returns the system to the
Program
Menu
.
Figure 25. Changed From Default screen.
Summary of Contents for GX9 ASD
