Toshiba GN-1010, Operator'S Manual

Page: 34 / 62

GN-1010 User’s Manual — Functions of the Utility Software
33
Filter
This tab performs the filter setting regarding MAC address and protocol.
<Operation Button>
[New].................. Creates new list.
[Delete]............... Deletes the list previously set.
[Open] ................ Opens the saved list file.
[Save] ................. Saves created list.
<Display Item>
(*1) : Applied only to “access point”.
Classifi-
cation
Parameter Default
Value
Description
MAC
Address
Filter
Enable MAC
Address Fil-
ter (*1)
Disabled Determines whether or not the MAC address filter is used.
•
Enabled/Disabled
*
When enabled, connection to another AP other than the
clients which has the permitted MAC address is refused.
MAC
Address List
(*1)
- Displays the permitted MAC address list when “MAC
Address Filter“ is enabled. You can register or delete MAC
address, one by one, by [New] or [Delete] command. You
can also load the batch list from the list file, and save a list
as the list file. Up to 1024 addresses can be registered.
Protocol
Filter
Enable Pro-
tocol
Filter
Disabled Determines whether or not the protocol filter is used.
•
Enabled/Disabled
*
When enabled, transmission of the packet other than pro-
tocol is refused.
Protocol List - Displays the permitted protocol list when “Protocol Filter“ is
enabled. You can register or delete protocol, one by one, by
[New] or [Delete] command. You can also load the batch list
from the list file, and save a list as the list file. Up to 256
protocols can be registered.
Operation
Button