Toshiba GN-1010, Operator'S Manual

Page: 30 / 62

GN-1010 User’s Manual — Functions of the Utility Software
29
Wireless
This tab sets the wireless parameters for the device.
<Entry Item>
Classifi-
cation
Parameter Default
Value
Description
WSL
(Original)
WSL Scram-
ble
Disabled
This function is not supported.
WSL Scram-
ble Key
0 to all
WEP
WEP Disabled Determines whether or not the WEP funciton is used.
Default Tx
Key
Setting is
not allowed.
(1)
Selects the WEP key number to use for data transmission.
•
1 to 4
Key 1 Setting is
not allowed.
(A1B2C3D4
E5
40 bits)
Sets the WEP key for WEP encryption.
•
Hexadecimal value (0 to 9, A to F)
*
To perform communications using the WEP function, the
key placed in the default send key number used for trans-
mission must be the same as that placed in the same
location on the receiver.
Key 2 to 4 Disabled
Exten-
sion
Control
Extended
Roaming
(*1)
Disabled Sets the AP roaming method.
•
Enabled/Disabled
*
When enabled, "AP Login Priority" setting is allowed.
Roaming
Threshold
(*2)
Setting is
not allowed.
(80)
Selects the threshold value to initiate roaming.
•
50 to 150
*
Roaming is performed when the average RSSI value dur-
ing the RSSI sampling time is less than this value.
RSSI Sam-
pling
Time (*2)
Setting is
not allowed.
(3 sec.)
Selects the sampling time (sec.) to obtain the RSSI value to
initiate roaming.
•
1 to 10