Toshiba GD-1151 Service Manual Download Page 28 | Manualshive

Page: 28 / 90

background image

GD-1150/1151/1200/1201/1160/1260

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved

LSU-RELATED FUNCTIONS

2 - 2

2.2

Recording Paper Selection Algorithm and Printing Algorithm

Before printing the received image, the preset settings are evaluated in the order of the following 1) and
2), and the printing is performed based on the result.

1) Recording paper selection algorithm

- Basically, the received image is printed on a sheet of paper of the same size as the original.

However, if this size is not available, this algorithm determines on which size of recording paper
the output should be made. (Actual Size Mode/Free Mode)

2) Printing algorithm

- Determines how the received image is to be printed. (Discard printing/Vertical reduction printing/

Regular size reduction printing/Split printing)

2.2.1

Recording paper selection algorithm

It is possible to distinguish the size of each received image (A3(LD)/B4(LG)/A4(LT)/B5/A5). Basically,
recording paper of the same size as the original is used for printing. If recording paper of the size is not
available, this algorithm selects paper of another size according to the setting in the Setting Mode.

1) Actual Size Mode (13-517: 0)

- Printing is performed when regular size reduction is not applied to the received image. In this

mode, an A4/LT received image is printed on a B4 recording paper.

2) Free Mode (13-517: 1)

- Printing is performed on any available recording paper.

2.2.2

Printing algorithm

Recording paper has its effective printing area. Even if the size of the original paper and the recording
paper are the same, the length of the original is normally longer.
This means that the received image would be divided onto two sheets. To prevent this, the printing
algorithm works as described in the following pages.

04/06

«
...
26
27
28
29
30
...
»

Summary of Contents for GD-1151



























































































Reviews:

No comments

Related manuals for GD-1151

Brand: LabelTac Pages: 2

imageCLASS Mf6160dw

Brand: Canon Pages: 64

imageCLASS MF6500 Series

Brand: Canon Pages: 132

imageCLASS MF5550

Brand: Canon Pages: 120

imageCLASS MF5630

Brand: Canon Pages: 85

imageCLASS MF5550

Brand: Canon Pages: 136

IMAGECLASS MF7400

Brand: Canon Pages: 40

imageCLASS MF5850dn

Brand: Canon Pages: 34

imageCLASS MF6500 Series

Brand: Canon Pages: 16

imageCLASS MF6540

Brand: Canon Pages: 82

imageCLASS MF5550

Brand: Canon Pages: 99

imageCLASS MF5630

Brand: Canon Pages: 24

imageCLASS MF5770

Brand: Canon Pages: 2

imagePRESS C7000VP Series

Brand: Canon Pages: 48

imageClass MF5650

Brand: Canon Pages: 40

imageCLASS MF5770

Brand: Canon Pages: 8

imageCLASS MF4880dw

Brand: Canon Pages: 36

imageCLASS MF4890dw

Brand: Canon Pages: 116

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands