Toshiba GD-1151 Service Manual Download Page 13 | Manualshive

Page: 13 / 90

background image

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved

GD-1150/1151/1200/1201/1160/1260

SPECIFICATIONS AND OUTLINE OF SYSTEM

1 - 5

1

1.3

Features

• A3/LD scanning

Scans data across A3/LD width and transmits in A3/LD actual size.

• High-speed scanning

Inputs an A4/LT-size transmitted document in about 0.7 seconds (A4/LT document transmitted
widthwise).

• High-speed transmission

33.6 Kbps high speed modem
Toshiba original high-speed communication modes EX and HS
JBIG encoding system

• Dual Access

- FAX transmission

There are two types of FAX transmission: Page-by-page direct transmission and memory trans-
mission that all pages are stored in the memory before being transmitted.

- FAX reception

Basically, all pages are input in the memory before being output. This reduces the time that the
FAX communication occupies the machine, making Dual Access between the copying/faxing and
printing operation possible.

Namely, the followings are possible:
- Memory input during the memory transmission
- Memory input during the memory reception
- Copying during the memory transmission
- Reception during the copying
- Reception during the memory output
- Reception during the list output

• Laser printing on plain paper

Printing is made on the standard size paper (A3/LD, B4/COMP, A4/LT/LG, A4-R/LT-R, B5, B5-R,
FOLIO, and A5-R/ST-R) with the laser system.

• Gradation

256 tones, error diffusion method

• Memory communication function

Image data can be stored in the HDD. In the delayed transmission, image data read from an original
are stored in the memory, then sent when the specified time comes.
Other memory functions: multi transmission, memory reception, ECM communication, etc.

• Smoothing

The smoothing process is applied to the received images so that they are changed from 8 × 3.85,
8 × 7.7, 8 × 15.4 or 16 × 15.4 to 24 × 92.4 (equivalent to 600 × 2400dpi), then printed out.

• Editing function

Duplex transmission and duplex printing are possible.

• FAX data file storage capacity

360 MB file storage capacity is added (for transmission: 240 MB, for reception: 120 MB)

Note:

Note:

Note: For hard drivers, GB means 1 billion bytes.

«
...
11
12
13
14
15
...
»

Summary of Contents for GD-1151



























































































Reviews:

No comments

Related manuals for GD-1151

Brand: Unimark Pages: 38

Brand: Lexmark Pages: 2

Brand: Ricoh Pages: 236

Brand: Oki Pages: 20

Brand: MIMAKI Pages: 20

Brand: Ricoh Pages: 12

Brand: Oki Pages: 175

Brand: GALLERY Pages: 10

Brand: Canon Pages: 1384

Brand: Canon Pages: 642

Brand: DataMetrics Pages: 35

Brand: DataMetrics Pages: 37

Brand: Epson Pages: 20

LQ 870 - B/W Dot-matrix Printer

Brand: Epson Pages: 5

Brand: Epson Pages: 2

Brand: Epson Pages: 2

Brand: Epson Pages: 111

Brand: Epson Pages: 153

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands