manualshive.com logo in svg

Toshiba FC15, Operator'S Manual

Share
Download
Toshiba FC15 Operator'S Manual Download Page 134

130

Limit line

Side guide

Side guide

0.5mm

0.5mm

When the paper supply in the selected cassette or  the optional large-capacity feeder runs
out, the cassette or large-capacity feeder symbol on the display panel flashes and this
message appears:

Add paper

Add paper as described below.

1

2

Adding Paper to the Front Cassette

1. ADD PAPER SYMBOL

Note:

Check that there is a slight gap (about 0.5
mm) left between the paper and each of
the side guides as shown; the total gap
should not exceed 1 mm. If the gap is not
suitable, paper misfeeding may possibly
occur.

Place the paper in the cassette.

●

Up to 600 sheets of paper (80g/m

2

) can be

set. (See page 18.)

●

Fan the paper well before placing it in the
cassette.

●

Do not add paper above the line on the back
guide.

●

Do not use creased, folded, wrinkled or damp
sheets of paper.

Pull out the cassette slowly until it comes

to a stop.

Summary of Contents for FC15












































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands