TOS-SN-1
Γ
For additional assistance, please contact Toshiba Adjustable Speed Drive Marketing Dept. at (800) 872-2192
Safety Precautions
Located on the inverter and in its instruction manual, important information is contained for
preventing injuries to users and damages to assets and for proper use of the device. Read the
instruction manual attached to the inverter along with this manual for complete understanding of
the safety precautions and adhere to the contents of these manuals.
Handling
Danger
Never Disassemble
▼
Never disassemble, modify or repair the product.
Disassembling the inverter could cause electric shocks, fire
or
injuries. For repairs, call your agency.
Prohibited
▼
Do not remove connectors when the power is on. It could
lead to
electric shocks.
▼
Do not put or insert foreign objects such as waste table, bars,
or wires into the product. It could lead to electric shocks or
fire.
▼
Do not splash water over the product. It could lead to electric
shocks or fire.
Mandatory
▼
Power off the inverter before removing wires.
▼
Turn off the power immediately if any abnormalities such as
smokes, smells or abnormal noise are found. Neglecting any
of these conditions could lead to a fire. For repairs, call your
agency.
Transportation and installation
Danger
Prohibited
▼
Do not install or operate the inverter if it is damaged or any
part is missing from it. Operating the inverter in a defective
condition could lead to electric shocks or fire. For repairs,
call your agency.
▼
Do not put any inflammable material near the product. It
could ignite a fire if the product sparks because of a
breakdown.
▼
Do not install the product where it could be splashed with
water and the like. It could lead to electric shocks or fire.
Mandatory
▼
The product must be used under environmental conditions
prescribed in this operation manual. Using the product under
conditions not specified by the operation manual could lead
to breakdown.
