manualshive.com logo in svg

Toshiba e-STUDIO2820C, Service Handbook, Page: 89 / 486

Share
Download
Toshiba e-STUDIO2820C Service Handbook Download Page 89

2

© 2008 TOSHIBA TEC CORPORATION All rights reserved

e-STUDIO2820C/2830C/3520C/3530C/4520C

SELF-DIAGNOSTIC MODE

2 - 63

2.5

Setting mode (08)

The items in the setting code list can be set or changed in this setting mode (08).

Note: 

When the power should be turned OFF, be sure to shut down the equipment by pressing the 
[ON/OFF] button for a few seconds.

Notes: 

1. The digit after the hyphen in “Code” of the following table is a sub code.
2. In “RAM”, the SRAM of the board in which the data of each code is stored is indicated. “M” 

stands for the LGC board, “SYS”, “NIC” and “UTY” stands for the SYS board.

2.5.1

Classification List of Setting Mode (08)

Classification

Setting Mode (08)

User interface

[ACS]

9698

[AMS]

605

[Feeding paper media]

9185-0 to 1

[X in 1]

650

[Color specification]

643, 644

[Indicator]

671

[Edit copying]

645, 646

[Sound]

610, 969, 970

[Counter]

202

[Cascade]

652, 653

[ACS]

268

[Screen]

207, 602

[Administrator]

263, 9882

[Feeding setting]

658, 659

[Language]

220, 221, 1929, 1930, 1931, 1932, 1933, 1934, 1935

[Original counter]

302

[Original direction]

628

[Copy volume]

300

[Automatic calibration]

632

[Default setting]

276, 277, 278, 279, 280, 281, 282, 283, 284, 285, 286, 289, 

331, 603, 604, 607, 618, 642

[Jam releasing]

9359

[Offsetting between jobs]

682

[Security level]

1708

[Sorting]

627, 634, 641, 649

[Timer]

204, 205, 206

[Template]

1140

[Image shift]

636, 1429, 1430

[Tray reset]

648

[Date]

640

[Annotation]

651, 657

[Displaying number]

342, 1478, 9891

[Job Build]

1130, 1131

[File]

209, 218, 219

Summary of Contents for e-STUDIO2820C







































































































































































































































































































































































































































































































Reviews:

No comments