Toshiba E-studio2555c Quick Start Manual Download Page 19

Page: 19 / 84

Installing Client Software

How to install the client software such as the printer driver from the Client Utilities/User Documentation DVD co-packed

with the equipment is described as follows.

Installing Client Software

Recommended installation

The recommended client software such as the printer driver can be installed all in one go.

Turn the power ON and confirm that “READY” appears on the touch panel.

P.12 “Turning Power ON/OFF” in this manual

Insert the Client Utilities/User Documentation DVD in the DVD-ROM drive of a Windows

computer.

To install the client software, log onto Windows with a user account which enables the installation such
as “Administrators”.

Select [I agree to the terms of the License Agreement.] and click [Next].

Click [Recommended].

Click [Install].

A list for the discovered printers is displayed. Then

select this equipment on the list and

click [OK].

Summary of Contents for E-studio2555c




















































































Search results

Summary of Contents for E-studio2555c

Reviews:

Related manuals for E-studio2555c

Brands by name

Popular brands

Toshiba E-studio2555c, Quick Start Manual

Search results

Summary of Contents for E-studio2555c

Reviews:

Related manuals for E-studio2555c

Brands by name

Popular brands