59
Item name
Setting
Function description
ADMIN
Test Print
Yes, No
Carries out a print test of the ink cartridge for reuse counter mark.
Placing paper in the paper feed tray and pressing
after select-
ing [Yes] runs the mark print test.
Change PIN
-
Changes the administrator PIN code.
USB Cloning
Create Clone
File, Apply
Clone
Creates a duplicate file of the setting data using the cloning func-
tion. You can install the created duplicate file on another Paper Re-
usable Device. This function is useful when you want to specify the
same settings in multiple Paper Reusable Device.
Selecting "Create Clone File" and pressing
displays the screen
to configure the PIN code. The configured PIN code is necessary to
"Apply Clone".
Notes
• When "cloning", make sure the source and target are running the
same software version. You can check the software version and
update from TopAccess.
TopAccess Guide : “Chapter 7: [Administration] Tab Page” -
“[Setup] Item List”
TopAccess Guide : “Chapter 7: [Administration] Tab Page” -
“[Maintenance] Item List”
• The PIN code is a number of up to 32 digits (0 to 9).
• When installing a clone file created using TopAccess, change the
extension of the clone file to "enc".
Continued on the next page
Summary of Contents for e-Studio RD30
