manualshive.com logo in svg

Toshiba e-Studio RD30, User Manual

Share
Download
Toshiba e-Studio RD30 User Manual Download Page 2

2

Keep Reusing Paper!

The Paper Reusable Device e-STUDIO RD30/RD301 (this equipment) can erase the toner color on paper printed by the Multifunctional Digi-

tal Systems e-STUDIO306LP/307LP.

This equipment identifies whether or not the erased paper is suitable for reuse and sorts into reusable (for Reuse) because it is not torn and the 

like, and non-reusable (for Reject). Reusable paper can be printed again by e-STUDIO306LP/307LP and erased again by e-STUDIO RD30/RD301.

You can reuse paper by repeating this cycle. If you continue reusing paper,

you can reduce paper consumption and carbon dioxide emission compared to printing with normal toners.

When the printed paper is no longer necessary, erase it with e-STUDIO RD30/RD301 for reuse. Before erasing, you can scan and save the 

data as a PDF file and the like.

Multifunctional 

Digital Systems

e-STUDIO306LP/307LP

Keep reusing means ...

Fewer sheets of 

paper consumed

Lower carbon 

dioxide generation

Good for the future of the Earth!

Printed paper

Reusable paper

Scan 

and Save

Before 

erasing

Erase

When no longer 

necessary

Non-reusable 

paper

Paper Reusable Device (this equipment)

e-STUDIORD30/RD301

Sort

Disposal

Reject

Reuse

Summary of Contents for e-Studio RD30





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands