manualshive.com logo in svg

Toshiba E-STUDIO 555, Copying Manual, Page: 73 / 178

Share
Download
Toshiba E-STUDIO 555 Copying Manual Download Page 73

3.BASIC COPY MODES

Selecting Finishing Mode    71

3 BASIC COPY MODES

‰

Stapling and hole punching the sheets without making copies

You can place paper on the Inserter and only staple, hole punch or stitch the sheets without making copies. This is useful 
when you forget to perform the finishing process after making copies.

1

Place paper on the Inserter.

 

 P.70 “Placing paper on the Inserter”

2

Perform settings of stapling and hole punching.

For stapling or saddle stitching, press the stapling button. The lamp corresponding to the selected staple mode 
lights. Press the stapling button to switch the staple mode.
For hole punching, press the hole punch button. The hole punch lamp lights.

y

Saddle stitching is available only when the Saddle Stitch Finisher (optional) is installed.

y

The hole punch mode can be used together with the staple mode, not with the saddle stitch mode.

When performing saddle stitching, place paper so that the cover or 
back cover sheet will be at the bottom.

3

Press the start button on the Inserter.

The operation starts. The start lamp blinks during operation and all the 
lamps go off when it has finished.

Hole punch

button/lamp

Staple

button/lamp

Summary of Contents for E-STUDIO 555



















































































































































































Reviews:

No comments