manualshive.com logo in svg

Toshiba E-STUDIO 555, Copying Manual, Page: 29 / 178

Share
Download
Toshiba E-STUDIO 555 Copying Manual Download Page 29

2.HOW TO MAKE COPIES

Placing Originals    27

2 HOW TO MAKE COPIES

‰

Single feed mode

When the feeding mode is set at “single feed mode”, an original is fed automatically as it is placed on the RADF. It is useful 
when you want to copy only 1 original sheet.

 

 P.119 “ADF -> SADF”

3

If there is another original, insert it in the same way.

The original is pulled in whether or not you press [YES].

4

After all the originals are pulled in, press [FINISHED].

Even if you do not press [FINISHED], copying will start when the current operation is cleared by means of the 
automatic function clear.

 

 P.47 “Clearing all settings changed”

1

Align the side guides to the original length.

2

Insert the original with its face up and straight along 
the side guides.

The original is automatically pulled in and then the menu of step 3 will 
be displayed on the touch panel.

Be sure to let go of the original when it starts being pulled.

Summary of Contents for E-STUDIO 555



















































































































































































Reviews:

No comments