manualshive.com logo in svg

Toshiba E-STUDIO 555, Copying Manual, Page: 157 / 178

Share
Download
Toshiba E-STUDIO 555 Copying Manual Download Page 157

6.TEMPLATES

Deleting Groups or Templates    155

6 TEMPLATES

„

Deleting templates

1

In the template menu, select the group to which the desired template is registered.

1) Press the [REGISTRATION] tab.
2) Press the button for the desired group.
3) Press [OPEN].

To switch the menu

y

Press  

or .

y

Key in the group number (3 digits).

2

Enter the password as follows and then press [OK].

When the public template group is selected:

 Press [PASSWORD] and then enter the Admin Password (6 to 10 

digits) with the buttons on the touch panel or the digital keys on the control panel.

When a private group is selected:

 Key in a 5-digit password set for the selected group. If no password is set, go 

to step 3.

When you enter the wrong Admin Password 3 times consecutively, this equipment will be locked for 30 
seconds. In this case, wait until it is unlocked and then enter the correct password.

Summary of Contents for E-STUDIO 555



















































































































































































Reviews:

No comments