manualshive.com logo in svg

Toshiba e-STUDIO 4511, Operator'S Manual, Page: 14 / 313

Share
Download
Toshiba e-STUDIO 4511 Operator'S Manual Download Page 14

12

GENERAL PRECAUTIONS (Cont.)

Other Points

- Make sure that there is enough space around the system to facilitate changing of parts and maintenance.

If there is insufficient space, some operations, such as bypass feeding, will become difficult and the 
Colour Capable Departmental Systems could even break down.
To insure optimal operation, allow clearances of at least 80 cm on the right, and 10 cm on the left and 
behind (refer to the illustration below).

- Adverse environmental conditions may affect the safe operation and performance of the Colour Capable 

Departmental Systems, and the Colour Capable Departmental Systems could break down.

- Avoid locations near windows or with exposure to direct sunlight.
- Avoid locations with drastic temperature fluctuations.
- Avoid too much dust.
- Avoid location that suffer from vibration.

- Allow the air to flow freely and make sure there is a ventilator.

With inadequate ventilation, the unpleasant odor released by ozone will begin to dominate the 
atmosphere.

80 cm

10 cm

10 cm

Summary of Contents for e-STUDIO 4511


























































































































































































































































































































Reviews:

No comments