manualshive.com logo in svg

Toshiba e-STUDIO 4511, Operator'S Manual, Page: 10 / 313

Share
Download
Toshiba e-STUDIO 4511 Operator'S Manual Download Page 10

8

PREFACE

Thank you for purchasing the Toshiba Colour Capable Departmental Systems e-STUDIO3511/4511. This 

Operator’s Manual describes the following:

- How to use the Colour Capable Departmental Systems.

- How to inspect and carry out maintenance on the Colour Capable Departmental Systems.

- How to remedy mechanical and copying problems.

Before using the Colour Capable Departmental Systems, thoroughly read and understand this Operator’s 

Manual. To ensure that clean copies are made at all times and to keep your Colour Capable Departmental 

Systems in optimum working order, this Operator’s Manual should be readily available for future reference.

To ensure correct and safe use of the Toshiba Colour Capable Departmental Systems e-STUDIO3511/

4511, this Operator’s Manual describes safety precautions according to the following three levels of 

warning:

Before reading this Operator’s Manual, you should fully understand the meaning and importance of these 

signal words.

-

Warning

Indicates a potentially hazardous situation which, if not avoided, could result in death, serious injury, or 
serious damage, or fire in the equipment or surrounding assets.

-

Caution

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury, 
partial damage of the equipment or surrounding assets, or loss of data.

-

Note

Indicates a procedure you should follow to ensure the optimal performance of the Colour Capable 
Departmental Systems and problem-free copying.

-

Tip

Describes handy information that is useful to know when operating the Colour Capable Departmental 
Systems.

-

Advice

Describes an operation you should follow to keep the Colour Capable Departmental Systems in good 
working order.

Summary of Contents for e-STUDIO 4511


























































































































































































































































































































Reviews:

No comments