6
6 - 16
e-STUDIO350/352/353/450/452/453
SCANNER
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
6.7 Disassembly and Replacement
[A] Original glass
(1) Take off the right upper cover ( Chapter
2.5.1 [F]).
(2) Remove 2 screws and take off the fixing
bracket.
[B] Lens cover
(1) Take off the original glass ( Chapter 6.7
[A]).
(2) Remove 6 screws and take off the lens
cover.
[C] Automatic original detection sensor
(APS sensor)
(C-1) A4 series
(1) Take off the lens cover ( Chapter 6.7 [B]).
(2) Disconnect 1 connector from the SLG board.
(3) Release the harnesses from 6 harness
clamps.
(4) Remove 1 screw each and take off the APS
sensors (5 pcs.).
(3) Take off the original glass.
Note:
When installing, fit 2 small protrusions of the
original glass in the groove of the equip-
ment and fix the original glass with the fixing
bracket by pushing it to the left rear direc-
tion.
Original glass
Fig. 6-701
Fig. 6-702
Fig. 6-703
Fig. 6-704A
Protrusion
