Toshiba e-studio 2330C Imaging Manual Download Page 14

Page: 14 / 262

e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C

1-5

1.2 To Adjust the Density of an Entire Copy

Explanation

The density on a solid colored image and a photo or gradational image (halftones) can be adjusted as desired by

the user.

Procedures

* The use procedure varies, depending on whether you are going to adjust the density on a solid colored image or

a photo or gradational image. Refer to "To Adjust the Density on a Solid Colored Image" in order to adjust the

density on a solid colored image. Refer or "To Adjust the Density on a Photo or Gradational Image" in order to

adjust the density on a gradational image (halftones).

1.2.1 To Adjust the Density on a Solid Colored Image

If the density is decreased

If the density is increased

The solid colored area becomes lighter.

The solid colored area becomes darker.

Explanation

A particular color can be intensely darker or lighter, depending on the type of paper or original used. Adjust the

developer bias output, in order to adjust the amount of toner on the solid colored area and obtain the image

quality the user desires.

Procedures

* The service technician must perform the adjustment in accordance with the procedures below.

1. General Adjustments – Copying, Printing and e-Filing (Output from Box)

Summary of Contents for e-studio 2330C

































































































































































































































































Search results

Summary of Contents for e-studio 2330C

Reviews:

Related manuals for e-studio 2330C

Brands by name

Popular brands

Toshiba e-studio 2330C, Imaging Manual

Search results

Summary of Contents for e-studio 2330C

Reviews:

Related manuals for e-studio 2330C

Brands by name

Popular brands