background image

57

FCC Notice

EN

GLI

S

H

disconnect this equipment from the network until the problem has been corrected or until you are sure that 
the equipment is not malfunctioning.

 

The optional Handset Kit is hearing aid compatible.

 

For protection against the risk of electric shock, always disconnect all cables from the wall outlet before 
servicing, modifying or installing the equipment.

 

This equipment may not be used on coin service provided by the telephone company nor connected to party 
lines. Connection to party line service is subject to state tariffs. (Contact the state public utility commission, 
public service commission or corporation commission for information.)

 

If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of 
this equipment does not disable your alarm equipment. If you have questions about what will disable alarm 
equipment, consult your company or a qualified installer.

 

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or 
other electronic device to send any message via telephone facsimile machine unless such message clearly 
contains in a margin at the top or bottom of each transmitted page or on the first page of transmission the 
following information:

 

1. Date and Time of transmission.
2. Identification of either business, business entity or individual sending the message.
3. Telephone number of either the sending machine, business entity or individual.

 

In order to program this information into your facsimile machine, you should refer to

 

page 28 in this 

Operating Instructions to complete the steps.

 

Example of Header Format (DATE and TIME, LOGO, ID Number setting)

MMM-dd-yyyy 09:00                                       TOSHIBA                                                       201 348 7000                    P.01/05 

                

1) Date and Time                              2) LOGO                                                 3) ID Number

Summary of Contents for e-STUDIO 191F































































Reviews: