Toshiba DKT3020 SD Page 27 User Manual Download

Page: 27 / 104

The Basics

Call Transfer

Strata CTX DKT3000/2000-Series Telephone 05/02

Call Transfer

1. While on a call, press

&QI7UQ

. Your Line LED flashes green and you hear internal

dial tone.

2. Dial the extension where the call will be transferred. You can remain on the line

and announce the call or immediately “blind transfer” the call.

During call transfer, you can connect all three parties by pressing your flashing
extension button or

&QI7UQ

•

If you get voice mail, you can leave a message or hang up and let the
transferred caller leave a message.

•

If you hear a long single tone, then announce the call over the called telephone’s
speaker.

3. Transfer with Camp On: If the station to which you want to transfer the call is busy,

you may hang up and the transferred trunk or station will be camped on to the busy
destination.

➤

To transfer a call directly to Voice Mail (VM)

1. While on a call, press

&QI7UQ

2. Enter

3. Enter the VM mailbox number (usually the same as the extension number) +

4. Hang up and the caller is connected to the VM mailbox. This feature does a blind

transfer to VM.

➤

To perform Call Transfer Immediate

1. While on a call, press the

TRNS

Soft Key. The DKT3014 LCD shows

“TRANSFER.”

2. Dial the extension where you wish to transfer the call.The call rings the destination

station and your telephone returns to the idle state.

Summary of Contents for DKT3020 SD









































































































Search results

Summary of Contents for DKT3020 SD

Reviews:

Related manuals for DKT3020 SD

Brands by name

Popular brands

Toshiba DKT3020 SD, User Manual

Search results

Summary of Contents for DKT3020 SD

Reviews:

Related manuals for DKT3020 SD

Brands by name

Popular brands