- 16 -
6.7.5 SHARPNESS
Menu
<CAMERA SETUP>
<PAN/TILT SETUP>
<PRESET TITLES>
<OTHERS>
EXIT
MAIN MENU
<FOCUS>
WB ATW
<AE>
ZOOM LIMIT X18
SHARPNESS 10
<LINE LOCK>
PRIVACY ZONE
CAMERA MENU
The sharpness can be controlled from 0-15, with 15 being the sharpest.
To change the SHARPNESS:
1. Enter the preset command to access the main menu.
Refer to section 6.1 for the controller model and preset command.
2. Position the cursor ( ) next to CAMERA SETUP and press the OPEN button to access the
Camera menu.
3. Position the cursor next to SHARPNESS and press the OPEN button to move the cursor to the
right.
4. Move the joystick up or down to select the sharpness level.
5. To accept the selection, press the OPEN button or to cancel the selection, press the CLOSE
buttons.
6.7.6 LINE LOCK CONTROL
The dome camera can be synchronized with the power supply frequency.
Menu
• Line Lock can be set to ON or OFF
• The Line Lock Phase can be set from 40 to 250 degrees.
<CAMERA SETUP>
<PAN/TILT SETUP>
<PRESET TITLES>
<OTHERS>
EXIT
<FOCUS>
WB ATW
<AE>
ZOOM LIMIT X18
SHARPNESS 10
<LINE LOCK>
PRIVACY ZONE
MODE OFF
LINE PHASE 180
LINE LOCK
MAIN MENU
CAMERA MENU
Downloaded from
www.Manualslib.com
manuals search engine
