- 23 -
6.8.8 SCAN TILT ANGLE
The tilt angle of the dome camera for auto scan, random scan and frame scan can be set from 0 to
85 degrees or 92 degrees (0 degree is straight down).
Menu
<CAMERA SETUP>
<PAN/TILT SETUP>
<PRESET TITLES>
<OTHERS>
EXIT
MAIN MENU
PAN/TILT MENU
AUTO FLIP ON
PROPORTIONALP/T ON
SCAN LIMIT STOPS OFF
MANUAL LIMIT STOPS OFF
PARK TIME MIN 0MIN
AUTO PATROL P1
→
OFF
SCAN SPEED 5DEG./S
SCAN TILT ANGLE 30DEG.
STOP TIME 10SEC
MAX SPEED 400DEG/S
To set SCAN TILT ANGLE:
1. Enter the preset command to access the main menu.
Refer to section 6.1 for the controller model and preset command.
2. Position the cursor ( ) next to PAN/TILT SETUP and press the OPEN button to access the Pan/
Tilt menu.
3. Position the cursor next to SCAN TILT ANGLE and press the OPEN button to move the cursor
to the right.
4. Move the joystick up or down to set the tilt angle.
5. To accept the selection, press the OPEN button or to cancel the selection, press the CLOSE
button.
6.8.9 STOP TIME
During frame scan, random scan or auto patrol, a stop time from 1 sec to 60 sec can be set. During
scanning, the camera will not move for the specified time at each stop.
Menu
<CAMERA SETUP>
<PAN/TILT SETUP>
<PRESET TITLES>
<OTHERS>
EXIT
MAIN MENU
PAN/TILT MENU
AUTO FLIP ON
PROPORTIONALP/T ON
SCAN LIMIT STOPS OFF
MANUAL LIMIT STOPS OFF
PARK TIME MIN 0MIN
AUTO PATROL P1
→
OFF
SCAN SPEED 5DEG./S
SCAN TILT ANGLE 30DEG.
STOP TIME 10SEC
MAX SPEED 400DEG/S
Downloaded from
www.Manualslib.com
manuals search engine
