Toshiba D-R410KU, Service Manual

Page: 12 / 66

1-5-1 E7K7ADC
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps to gain
access to item(s) to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and
dress the cables as they were originally.
2. Disassembly Method
Note:
(1) Identification (location) No. of parts in the figures
(2) Name of the part
(3) Figure Number for reference
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to “Reference Notes.”
Reference Notes
1. CAUTION 1: Locking Tabs (L-1) and (L-2) are
fragile. Be careful not to break them.
2. CAUTION 2: The DVD MECHANISM & DVD MAIN
BOARD ASSEMBLY is adjusted as a unit at
factory. Therefore, do not disassemble it. Replace
the DVD MECHANISM & DVD MAIN BOARD
ASSEMBLY as a unit.
NOTE: BOARD MEANS PRINTED CIRCUIT BOARD.
ID/
Loc.
No.
Part
Removal
Fig.
No.
Remove/*Unhook/
Unlock/Release/
Unplug/Desolder
Note
[1] COVER TOP D1 6(S-1) ---
[2]
PANEL
FRONT
D2
*5(L-1), *3(L-2),
*CN2204
1
[3]
BOARD
FRONT
D2 4(S-2), *CN3002 ---
[4]
BOARD
POWER
SWITCH
D2 (S-3) ---
[5]
DVD
MECHANISM
& DVD MAIN
BOARD
ASSEMBLY
D3
4(S-4), (S-5), (S-6),
*CN101, *CN701,
*CN901, *CNA02,
BOARD SUPPORT/
BOARD SPACERS,
M-BOARD PLATE
EARTH
2
[6]
BOARD
POWER
SUPPLY
D4 4(S-7) ---
[7]
PANEL
REAR
D5 (S-8), 6(S-9) ---
[8] BOARD AV D5
5(S-10), 2(S-11),
DV JACK,
DV PLATE EARTH
---
[3] BOARD FRONT
[4] BOARD POWER
SWITCH
[1] COVER TOP
[2] PANEL FRONT
[5] DVD MECHANISM
& DVD MAIN BOARD
ASSEMBLY
[6] BOARD POWER
SUPPLY
[9] BRACKET R FRONT
[7] PANEL REAR
[8] BOARD AV
[9]
BRACKET
R FRONT
D5 (S-12) ---
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
ID/
Loc.
No.
Part
Removal
Fig.
No.
Remove/*Unhook/
Unlock/Release/
Unplug/Desolder
Note
[1] COVER TOP
(S-1)
(S-1)
(S-1)
Fig. D1