Ceiling type
Installation Manual
EN
Ceiling type
Installation Manual
– 4 –
2
Removing wire guard
Remove the screws (2 pcs.) which are fixing the
wire guard.
Remove the clamp fixing screws and remove the
wire guard.
CAUTION
Attach back the wire guard once indoor unit is installed.
Remove the 2 screws fixing the wire guard and hung the
wire guard with the clamps during a service.
3
Removal of side panel
After removing the side panel fixing screws (1
each at right and left), slide the side panel forward
and then remove it.
4
Removal of protective vinyl
Peel out the protective vinyl on the level louver.
5
Removal of protector
Remove the protector (1 pcs.) of the fan.
(AP024 only)
Clamps
Screw
Wire guard
Protector
Slide forward.
Level louver
Side panel
4
Installation
REQUIREMENT
Strictly comply with the following rules to prevent damage of the indoor units and human injury.
• Do not put a heavy article on the indoor unit. (Even units are packaged)
• Carry in the indoor unit as it is packaged if possible. If carrying in the indoor unit unpacked by necessity, use buffering
cloth or other soft cloth to not damage the unit.
• To move the indoor unit, hold the hooking metals (4 positions) only.
Do not apply force to the other parts (refrigerant pipe, drain pan, foamed parts, or resin parts).
• Carry the package by two or more persons, and do not bundle it with plastic band at positions other than specified.
External view
Unit: in (mm)
A
Unit: in (mm)
Model MMC-
A
B
C
D
AP018
35.8”
(910)
33.7”
(855)
Ø1/4”
(6.4)
Ø1/2”
(12.7)
AP024
46.5”
(1180)
44.3”
(1125)
Ø3/8”
(9.5)
Ø5/8”
(15.9)
AP036, AP042
62.8”
(1595)
60.6”
(1540)
Conduit hole
(Hole for power supply cable. knockout)
Hole for remote control wires (knockout)
Left drain size
Refrigerant pipe
(Liquid side ØC)
B (Hanging position)
Refrigerant pipe (Gas side ØD)
Upper pipe draw-out port (knockout)
Pipe draw-out port
(knockout)
Drain port VP20
(Inner dia. Ø1.0” (26), hose
attached)
8
.5
” (2
16
) (G
as
p
ipe
)
7.
9”
(
2
00
) (
L
iq
ui
d
pi
pe
)
Drain pipe
connecting
port
Hole for remote control wires
Conduit hole
(knockout)
Left drain pipe
draw-out port
(knockout)
Hole for power supply cable
Outside air take-in port (Duct sold separately)
Knockout hole Ø3.6” (92))
Pipe hole on wall
(Ø3.9” (100) hole)
Unit
Ceiling surface
Hanging bolt
Wit
hin
2.
0”
(
5
0)
Wireless sensor mounting section
3.3” (84)
8.5” (216)
4.3” (110)
3.0” (76)
4.1” (105)
8.3” (210)
6.6” (167)
3.8” (97)
3.0” (75)
5.7” (146)
13.7” (347)
12.2” (311)
5.3” (135)
3.3” (84)
12
.6
” (3
20
)
6.
7”
(
1
70
)
5.
7”
(1
45)
3.
5”
(9
0)
1.
3” (
32)
3.
6”
(9
2)
6.
7” (
171
)
2.
1”
(53
)
5.
1”
(1
30)
2.
0”
(
5
0)
26
.8
” (6
80
)
5.
6”
(
1
41
)
4.
5”
(11
4
)
10.3” (262)
1.5” (39)
2.0” (52)
2.
8”
(7
0)
7-EN
8-EN
+00EH99876401_00Ta.book Page 4 Monday, January 17, 2011 10:47 AM
