4. LOADING THE RIBBON
4- 3
5. In the same way described in Step 3, move
the Ribbon Stopper of the Ribbon Shaft
(Take-up side) in accordance with the width
of the Ribbon Core. Fit a Ribbon Core
onto the Ribbon Shaft (Take-up side).
[Supplemental Remarks]
･
The Ribbon Core can be placed on the
Ribbon Shaft (Take-up side) more easily
by gently holding and squeezing the
centre of the metal plate of the Ribbon
Shaft (Take-up side).
6. Unroll and draw the ribbon under the Upper
Unit, and affix the leading edge of the ribbon
(self-adhesive) to the Ribbon Core.
7. Turn the knob of the Ribbon Shaft (Take-up
side) several times to take up the ribbon.
Precautions
･
Be careful not to twist or wrinkle the ribbon
while taking up the ribbon onto the Ribbon
Core.
Metal
plate
Gently squeeze the metal. plate.
