User’s Manual
1-6
Getting Started & Grand Tour
Initial Setup
The Setup Screen will be the first screen displayed when you turn on the
power. Setup your device according to the following steps:
1. In
Language/Date & Time Settings
, choose the language as you want
and then set the time zone, date and time. Click
Next
to continue.
2. In
Wi-Fi Settings
, turn on the
Wifi
. Choose an available network and
connect to it. Click
Next
to continue.
You may also skip this section and turn Wifi on later in
Settings
window.
3. In
EULA Agreement
, click
I accept
and then click
Finish setup
to
complete the whole setup process.
Device options menu
The device provides you with an option menu where you can quickly
change the mode of your device:
To open the Device options menu, press the power button for about two
seconds. The menu will be displayed with the following options:
Silent
mode
,
Airplane mode
,
Power off
and
Suspend
.
Turning off the power
The power can be turned off in one of two modes, either Shut Down Mode
or Suspend Mode. You can also turn the LCD off in order to extend the
battery life.
Shut Down Mode
When you turn off the power in Shut Down Mode no data will be saved and
the device will boot to the operating system’s main screen the next time it is
turned on.
1. If you have entered data, either save it to flash memory or to other
storage media.
■
Select
Power off
from the Device options menu.
2. Turn off any peripheral devices connected to the TOSHIBA AC100
device.
■
Never turn off the power while an application is running. Doing so could
cause loss of data.
■
Never turn off the power, disconnect an external storage device or
remove storage media during data read/write. Doing so can cause data
loss.
■
In any emergency case, you can also press the power button for about
six seconds to force power off.
Do not turn the device or peripheral devices back on immediately - wait a
short period to avoid any potential damage.
