Toshiba A355-S6882, Maintenance Manual

Page: 46 / 278

2 Troubleshooting Procedures
as instructed. The flowchart in Figure 2-2 gives a summary of the process. The procedures
described in this section are:
Procedure 1: Power status check
Procedure 2: Adaptor / battery replacement
Procedure 3: Power supply connection check
Procedure 4: Diagnostic check
Procedure 5: Internal connection check
Procedure 1 Power Status Check
The following LEDS indicate the power supply status:
Battery LED
DC-IN LED
The power supply controller displays the power supply status through the Battery and the DC-
IN LEDS as listed in the tables below.
Battery State LED colors Definition
Red, solid on Battery charging with AC.
White, solid on Battery fully charged by AC
Charging
Red color off Battery abnormal stop charging with AC
(Bad cell/ Overheated)
Red, blinking
(LED on for 1 second
every 4 seconds)
Battery within low state: 12 minutes
remaining
Red, blinking
(LED on for 1 second
every 2 seconds)
Battery within critical low state: 3
minutes remaining. The system is
protected and cannot be re-powered on
without the AC power connected.
Discharging
Red color off Battery not in low or critical low state;
It’s in discharging state
Table 2-1 Battery LED
Satellite A350, SATEGO A350, EQUIUM A350 Series Maintenance Manual
10