manualshive.com logo in svg

Toshiba A355-S6882, Maintenance Manual

The Toshiba A355-S6882 maintenance manual is a comprehensive guide for users looking to ensure the long-term performance and proper care of their Toshiba laptop. Available for free download on our website, it provides step-by-step instructions and helpful tips to keep your device functioning at its best.

Share
Download
background image

Appendix A  

 

Appendix A  Handling the LCD Module 

Precautions for handling the LCD module 

The LCD module can be easily damaged during assembly or disassembly. Observe the following 
precautions when handling it to prevent damaging it. 

 

1.

 

When installing the LCD module in the display assembly, make sure that you seat it so 
that it is properly aligned and maximum visibility of the display is maintained. 

 

 

2.

 

Be careful to align the holes at the four corners of the LCD module with the 
corresponding holes in the LCD cover before securing the module with screws.  
Do not force the module into place, because stress can affect its performance. 

Note: The panel’s polarized surface is easily scratched and damaged, so handle it 

carefully. 

 

Satellite A350 Series Maintenance Manual 

[CONFIDENTIAL] 

A-1 

Summary of Contents for A355-S6882























































































































































































































































































Reviews:

No comments

Related manuals for A355-S6882

Acer TravelMate 4100 Series Manuel D'Utilisation preview
TravelMate 4100 Series
Brand: Acer Pages: 86
Acer TravelMate 4060 Manuel D'Utilisation preview
TravelMate 4060
Brand: Acer Pages: 69
Panasonic Toughbook CF-Y5LWEZABM Operating Instructions Manual preview
Toughbook CF-Y5LWEZABM
Brand: Panasonic Pages: 40
InfoCase Fieldmate Series User Manual preview
Fieldmate Series
Brand: InfoCase Pages: 4
Fujitsu LIFEBOOK U7312 Operating Manual preview
LIFEBOOK U7312
Brand: Fujitsu Pages: 89
Fujitsu LIFEBOOK U904 Operating Manual preview
LIFEBOOK U904
Brand: Fujitsu Pages: 80
Fujitsu LIFEBOOK U745 Operating Manual preview
LIFEBOOK U745
Brand: Fujitsu Pages: 108
Fujitsu LIFEBOOK T937 Operating Manual preview
LIFEBOOK T937
Brand: Fujitsu Pages: 126
Fujitsu LifeBook U772 User Manual preview
LifeBook U772
Brand: Fujitsu Pages: 320
Fujitsu LIFEBOOK U5x4 Operating Manual preview
LIFEBOOK U5x4
Brand: Fujitsu Pages: 67
Fujitsu LIFEBOOK TH4410 Operating Manual preview
LIFEBOOK TH4410
Brand: Fujitsu Pages: 124
Fujitsu LIFEBOOK U727 Operating Manual preview
LIFEBOOK U727
Brand: Fujitsu Pages: 121
Fujitsu Lifebook TH700 User Manual preview
Lifebook TH700
Brand: Fujitsu Pages: 413
Fujitsu LifeBook U772 Operating Manual preview
LifeBook U772
Brand: Fujitsu Pages: 64
LEXIBOOK JC221 Instruction Manual preview
JC221
Brand: LEXIBOOK Pages: 11
Dell Inspiron 1012 Specifications preview
Inspiron 1012
Brand: Dell Pages: 8
Dell Inspiron 1090 Service Manual preview
Inspiron 1090
Brand: Dell Pages: 46
Dell Inspiron 0F670RA00 Quick Start Manual preview
Inspiron 0F670RA00
Brand: Dell Pages: 26

Brands by name

Popular brands

Load more brands