Toshiba A355-S6882, Maintenance Manual

Page: 81 / 278

45
2 Troubleshooting Procedures
Satellite A350, SATEGO A350, EQUIUM A350 Series Maintenance Manual
45
This section describes how to determine if the Bridge media assemble Card player is
functioning properly. The process is summarized in Figure 2-16. Perform the steps below
starting with Procedure 1 and continuing with the other procedures as required.
Procedure 1: Bridge media assemble card test
Procedure 2: Express socket replacement check
Procedure 1 Bridge media assemble card test
The Bridge media assemble Card test card contains a Bridge media assemble card test
program. Ensure the card in fully inserted into the socket before running the program.
If an error occurs during the Bridge media assemble card test, perform Procedure 2. If no
error occurs, it is likely that the original Bridge media assemble card was faulty.
Procedure 2 Bridge media assemble Card socket replacement check
The Bridge media assemble Card socket may be damaged or defective, for instance the socket
pins can be bent. Disassemble the computer following the steps described in Chapter 4,
Replacement Procedures . If the problem persists, the system board may be defective or
damaged. Replace the system board with a new one following the steps in Chapter 4.