Initial Setup and Menu
57
Model Name
1
Press the
GREEN
button.
The
Model Name
screen will appear.
2
Use the
p
/
q
(arrow) buttons to select the model name then
press the
OK
button.
❖
Select a field and press the
OK
button to show the
software keyboard. Enter the first few characters of the
model name and press the
GREEN
button. The model
name starting with the entered characters will appear on
the
Model Name
screen.
NOTE
You do not need to set both model name and code set. If you select
Model
Name
and press
OK
, it will take you directly to the
Input & Mode key
screen and skip the code set.
The code set should be selected only when you know the code set.
Code Set
1
Use the
t
/
u
(arrow) buttons to select the code.
❖
After the code is selected, press the
RED
button to show
the
Test
screen. The test will start automatically.
NOTE
If a model has more than one Code Set, a message will appear stating “This
model has more than one Code Set. Please select and test your preferred
Code Set.” You will need to choose a code set using the
p
/
q
(arrow)
buttons and perform the Test option to ensure the correct Code Set has
been selected.
2
Press the
OK
button.
Input & Mode Key
screen will appear.
Input & Mode Key
1
Use the
t
/
u
(arrow) buttons to select the TV input to which
the IR device is connected.
❖
--- (Appears when
Device Type
is set to
Receiver
,
Misc
Audio
or
Amplifier
)
❖
ANT/CABLE
❖
Video1
❖
Video2
❖
ColorStream HD
Performing the initial setup
